STIRRUP JUMP A33 PRESTIGE COL.SILVER

STIRRUP JUMP A33 PRESTIGE, colore: SILVER

The A33 – STEPHI 2.0 is an aluminium stirrup made in series 6000
anticorodal aluminium, a material normally used in car manufacture  or in
aeronautics.  Stephi 2.0 is machined from solid aluminium and delicately
produced with smoothed contours in all parts.  It is ultra-resistant both to
abrasion and to mechanical stress.
Branches:
The branches have been smoothed on all sides, both externally to avoid
scratching the saddle when stored away with the stirrup irons hung from it,
and internally so that the rider’s feet can be easily withdrawn in the event of
a fall and also to prevent abrasion to the rider’s boots.  
The attachment for the stirrup leather is rotated at an angle to the stirrup iron
branches. This arrangement means that if the rider’s feet come adrift from
the stirrup iron, they can reconnect with it more easily.  The iron does not
hang parallel to the abdomen of the horse but is turned outwards.
The eyelet of the branches is very robust and broad enough to be used both
for traditional stirrup leathers and for dressage-design ones.
Stirrup tread:
The base of the tread is made of the same material as the branches
but the covering is in 1 mm thick brushed stainless steel.  Its surface is
highly resistant to abrasion, providing a grip and contributing to the rider’s
confidence.  At the same time it does not damage the sole of his/her boots.
The front line of teeth is at an angle to give increased grip in all situations.
The fastening screws are in stainless steel and held tight with anaerobic-
type sealant.